Turck Sensors > New Turck Banner light curtains that use integral muting.

Turck Sensors >  New Turck Banner light curtains that use integral muting.

Safety light curtains safeguard employees against injury as well as machines from damage by securing points of operation access and perimeters.

The 2 part optoelectronic safeguarding product results in screens of results at the same time, of sensing beams which stretch from one part of the enclosure to the other. Turck Banners’s innovative light curtains offer additional choices, but for a much lower cost.

Turck Banner’s new light curtain feature a in-built muting function,  Turck Banner’s innovative light curtains EZ-Screen safety  don't need a 3rd box, that will help aid set-up, decreases the quantity of wiring and reduces installation expenses.

Turck Banner’s safety curtains are resistant to EMI,RFI, ambient light , weld flash and strobe lights. Additionally they feature factory installed emitter as well as  circuitry for strength, reliability and vibration threshold.

Turck safety light curtains has integral muting it also includes a sensing span which ranges from 100 mm to 7 m . It also comes with 7 various,  defined muting settings choices that are accessible, these can include Override, Mute-Dependent, Mute-cycle, Bypass and Mute Enable, and  time extensions for "L"-style cell exit applications therefore making Turck EZ-SCREEN LPM which comes with integral muting extremely adaptable. Installation can be carried out without the need for a computer, hand-held programmer, perhaps alternatively some other device; also DIP switch settings includes several of the exact same features as a standard EZ-SCREEN Low-Profile.

Perfect for 2 or 4  sensor hookup/mute device choices, which include affordable two sensor "X-pattern" solution useful to be used in material entrances as well as exit applications, and "L" sensor solution that reduces the " floor space in manufacturing cell exit applications. Turcks recommended CSM Muting Splitter Cordset supplies simple setup, significantly less wiring, reduced set up charges by giving a whole QD connectorised remedy.

Also, a non-monitored or selectable monitored or Reset Status,  Mute Lamp,  as well as a couple of OSSD Status Outputs could be relayed to EZ-LIGHTs (Perhaps another indicating device) that has  detachable disconnect (RD) cordset as well as accessory end-cap mounting bracket. Simple to read on-board Status,Mute Device, Reset, Zone,  Status and Diagnostic indicators also  show the exact quantity + area that the beams are blocked as well as providing comprehensive diagnostics reducing down-time plus trouble shooting. You can now select a emitter test choice to simulate a "blocked" condition too.

For more information on Turck Banner’s new range of light curtains or any sensors from the Turck Banner range contact us at Electroquip.